When updating a linked component in Fusion, it may appear to use the latest version, but is still referencing an old version and changes are not seen. 1st Solution: Open the Linked Child Component's original file. Go to the Modify Menu. Select Compute All. Save the Child Component file. Go back to the main file with the linked components, and select Get All Latest. The model should now reflect. Here's a quick preview of what's coming in the May 2020 update of Fusion 360. Linewidth control, Free Sketch, and Copy Paste between drawings.
Below is the latest firmware version for the WorkBee CNC Machine. If you are installing a new WorkBee please download this version.
If you are updating from version 1.0.6 or older please follow this guide Connecting, Updating and Configuring Your WorkBee
If you are updating from version 1.0.7 or greater please follow this guide Updating WorkBee Firmware
The below table lists all the firmware releases for the WorkBee CNC Machine.
The following items makeup the firmware and control for the WorkBee CNC Machine:
- DuetWifiServer (If applicable)
When updating from a previous version, you can download from the column named 'Update Download'. This download only includes the files which have been changed from the previous version. These are the only files which need updating. This column can only be used if coming from a previous version in chronological order, for example 1.0.5 > 1.0.6.
|Version||Full Download||Update Download||Date||Release Notes||Installation Notes|
|1.0||WorkBee-Firmware-v1.0||N/A||06/12/2018||Latest Release of Duet Firmware & Web Control. Configuration for WorkBee CNC Machine set. Work coordinate control added. Pause/Resume buttons function fixed for Work coordinates.|
|1.0.1||WorkBee-Firmware-v1.0.1||N/A||06/12/2018||Removed WifiServer from system settings.|
|1.0.2||WorkBee-Firmware-v1.0.2||N/A||16/01/2019||Added XYZ Touch Probe functions.|
|1.0.3||WorkBee-Firmware-v1.0.3||N/A||12/03/2019||Fixed Duet Wifi access point mode bug. By default, the machine now has to be homed before movement can occur.|
|1.0.4||WorkBee-Firmware-v1.0.4||N/A||08/05/2019||- Removed error when homing Z - Set the machine to CNC Mode with M453 - Fixed Return To Work Zero to work correctly with M453 - G0 is now treated as a rapid move, G1 as a controlled move - Add G21 to homing commands to make sure machine is in mm - Fixed homing files to remove restricted movement due to steps/mm rounding||If updating from a previous firmware version, please complete the following manual as there is an extra step Connecting, Updating and Configuring Your WorkBee|
|1.0.5||WorkBee-Firmware-v1.0.5||N/A||06/06/2019||- Change movement commands to use H instead of S - Fixed bug in Homez.g - Power Loss Resume has been configured - A touch probe can now be setup on any spare extruder endstop and trigger level changed||If updating from a previous firmware version, please complete the following manual as there is an extra step Connecting, Updating and Configuring Your WorkBee|
|1.0.6||WorkBee-Firmware-v1.0.6||WorkBee-Firmware-v1.0.6-Update||25/06/2019||- Fixed homing files to prevent max limit error while homing.||Update files now available. This download only includes what has been changed to reduce update time. Don't forget to re-configure Step 7 of Connecting, Updating and Configuring Your WorkBee.|
|1.0.7||WorkBee-Firmware-v1.0.7||WorkBee-Firmware-v1.0.7-Update||01/11/2019||Added – workzero.g Runs when Go To Work Zero is pressed. Added - customconfig.g for custom settings instead of editing config.g Changed - Interface now WorkBee Control Changed – Comments on homeall.g, homex.g, homey.g, homez.g, Changed – Resume.g to work with multiple work coordinates Changed – Reformatted Config.g Removed - Obsolete Macros Removed – Commands from bed.g||If you are updating from version 1.0.6 or older please follow this guide Connecting, Updating and Configuring Your WorkBee|
Below is our latest Beta version of the WorkBee Firmware. Use this firmware at your own risk. Ooznest accept no liability whatsoever for anything which goes wrong when installing and using this firmware. We will not offer any formal customer support to users who are using this firmware, and will request the user to change to the latest stable version before proceeding with support.
How To Update Fusion 360
|1.0.1||Fusion-v1.0.1||13/02/2019||Enabled true arcs|
Use this link for an in-depth guide on installing a Post Processor - https://knowledge.autodesk.com/support/f...
Fusion 360 Student
For all Vectric Products use GRBL (mm) (*.g-code)